Results 1 to 8 of 8

Thread: Beating a dead horse/ Bottom metal and detach mag for 110 tatical .308

  1. #1
    New Member
    Join Date
    Apr 2014
    Posts
    5

    Beating a dead horse/ Bottom metal and detach mag for 110 tatical .308


    Cannot seem to find someone who makes one for an older type with internal box mag. Any pf ypu know what to do or where to go?
    Thanks!

    Semper Fi

  2. #2
    Basic Member 6mmBR_Shooter's Avatar
    Join Date
    Mar 2012
    Location
    Mommy's Basement
    Posts
    299
    Which older type do you mean? Long action? Short action?

    https://shop.pacifictoolandgauge.com...3e97377qemqng5

    http://www.cdiprecisiongunworks.com/...ed-4.275-.html

    You will likely need a new stock or have your stock modified for the system to work.
    FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others

  3. #3
    New Member
    Join Date
    Apr 2014
    Posts
    5
    I'll modify my stock no worries there. It is long action 110. But it ha an odd spacing on the lugs and SSS says they do not have anything for it. Looks like I'll go with the Tool Co. Or CDI directly

  4. #4
    Basic Member 6mmBR_Shooter's Avatar
    Join Date
    Mar 2012
    Location
    Mommy's Basement
    Posts
    299
    What is the spacing between the action screws?
    FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others

  5. #5
    Basic Member BoilerUP's Avatar
    Join Date
    Nov 2010
    Location
    Floyd Co, IN
    Age
    40
    Posts
    1,100
    CDI makes a Savage 110 Long Action DBM specifically for AICS-pattern 308 magazines. I have one, it works great.

  6. #6
    Edzzed
    Guest
    If you are gonna beat a dead horse, You gotta know how to do it. Here is the best instructions I can offer.

  7. #7
    New Member
    Join Date
    Apr 2014
    Posts
    5
    Well done!

  8. #8
    Basic Member
    Join Date
    Apr 2011
    Location
    Virginia Beach Va
    Age
    63
    Posts
    324
    CDI...period...I too have an older 110 FP Tactical in 308 with internal mag...got a Choate stock for it adn CDI inlet it and installed the DBM run it with 5 and 10 round AICS mags...about to send another to him soon...free inletting for the rest of 2014 just buy the bottom metal from him, Brownells or Midway...send in your stock...

Similar Threads

  1. Dead Horse
    By blvedere in forum Vendor Feedback
    Replies: 0
    Last Post: 06-12-2018, 02:18 PM
  2. Metal Bottom Metal Replacement Parts Cost
    By Chrazy-Chris in forum 110-Series Rifles
    Replies: 1
    Last Post: 05-18-2017, 05:57 PM
  3. Replies: 22
    Last Post: 02-09-2016, 09:31 PM
  4. 110 FCP-K 30-06 detach box bottom bolt release
    By Y2JPD in forum 110-Series Rifles
    Replies: 2
    Last Post: 09-19-2014, 08:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •