Recoil Pad for Savage 10 Trophy Hunter XP (wood stock)

[pmcclarty]

Recently bought limbsaver model number 10601 (recommended for savage 10...4.75 x 1.685). It is perfect width, however it is a little short (by like .17 in). The other model recommended for savage is 10111(4.92 x 1.605), which is perfect length but is not wide enough. Any suggestions?

PM

[Bharada]

I bought a medium Pachmayr Decelerator for mine. It fits perfectly.

[stomp442]

Grind to fit is the only way to go. Usually the mediums work best.

[CAPTBEACH]

Grind to fit medium...tip...freeze the pad solid in the freezer or in a bag of crushed dry ice...it will make grinding and sanding smooth easy button easy...

[stomp442]

Another trick is to use balistol aerosol spray on the sanding wheel and on the pad. Makes for a very smooth finish I prefer this method over the freezing.

[CAPTBEACH]

Another trick is to use balistol aerosol spray on the sanding wheel and on the pad. Makes for a very smooth finish I prefer this method over the freezing.

WD40 works too...

[pmcclarty]

Thanks everyone for ideas.....will try it...PM

[pmcclarty]

did you take off factory pad or just placed it over the factory pad?