Cool!
I was about to perform the " Shim" fix on my rimfire savage striker. I took the trigger group out. I stoned the sear face and lever contact surfaces, then I started looking at the engagement spring.
I had a AR15 LPG kit in my smithing tackle box, and realized the bolt catch spring was the same diamiter but shorter.
I put it in. Took the travel take up screw all the way down to the keeper bolt, and reassembled.
Perfect 3.2 lb trigger with no shim.
Try it.
Using Tapatalk
Cool!
Ill post pics of the 100m five shot groups this weekend.
Using Tapatalk
All fired at 100m. 5mph wind R-L. 40 Gr Winchester super x .22 WMR. 7.5 inch barrel. 10x magnification on the scope.
Triangles are 1 inch.
Last edited by oneissuevoter; 09-13-2014 at 11:07 PM.
Using Tapatalk
Very nice!
Bookmarks