Too cloudy to chrono any loads today so shot steel. Here is a before after. The copper cup from a 400gr JHP and a small lead that had to be the base. These were shot with 76gr RL7 I also shot a few 91.5 tac loads which I either over shot the plate or they vaporized. Not really sure which but there was spidering on the primers so I took the load down to an even 90grs of tac for the next session.

The 76gr RL7 load was very pleasant to shoot and quite accurate. My guess would be 1950-2000fps. It was 6" lower then my zero with 88grs of tac which I don't have fps on.