Hey all, this is my first post to this forum so any and all help would be greatly appreciated. I currently have Model 10P with accutrigger, synthetic stock and dbm.

http://www.impactguns.com/savage-10p...356220752.aspx

So I had a gunsmith replace the recoil lug with a factory accustock recoil lug purchased off of midway and put the rifle into an accustock I pruchased from ebay. This is the second gen model with/out the accuwedge. So the issue is, when i push the bolt forward the round springs/jumps up and will jam or hang in the chamber at which time I can't close the bolt. But If I back off the bolt just a little, the round will settle and the bolt will close just fine.

Thanks,