Sear adjustment help on model 12

[Gmountain]

My model12 will sometimes fire unexpectedly if the bolt is slammed home. I am assuming this can be rectified by adjusting the sear. Am I correct?

The trigger pull is very light. The previous owner used it for prairie dog hunting.

So if I understand correctly, a 1/8-1/4 tun on the sear screw should do the trick? does this sound about right?

[darkker]

Everyone I've had, or bought from some boob who "adjusted" it was different. Get it out of the stock and start testing.

[olddav]

Could the spring be set too light?

[darkker]

Certainly could

[Gmountain]

Thanks for help fellas. I adjusted the sear screw and the safety screw. I think I fixed it.