tight enough it don't come loose is how i do mine. Do you have the old slotted or the allen headed one? I had a bugger of a time with the slotted one keeping it tight.
How much torque on a bolt assembly screw? While trying to diagnose erratic performance, I found my assembly screw to be loose. I snugged it down tight but is there a specific value(Inch -pounds). I hope this explains some of the erratic targets I have been getting. Thanks in advance.
tight enough it don't come loose is how i do mine. Do you have the old slotted or the allen headed one? I had a bugger of a time with the slotted one keeping it tight.
"And you shall know the truth, and the truth shall make you free.” John 8:32 (New King James Version)
socket head/hex - 1/4"
"And you shall know the truth, and the truth shall make you free.” John 8:32 (New King James Version)
Had same issue with hex bolt on my 12VLP in 308 when new. Made adjustments at the range about four times using a torque wrench. Finally backed it off to loose then hand tight with an L shaped wrench, had the problem one more time, hand tightened it a bit harder and 1000 rounds later no problems.
Again this was from new so I kinda figured it was a combination of hitting the right torque and breaking in a new bolt?
Bookmarks