Results 1 to 10 of 10

Thread: Cheapest Place to get an EGW base?

  1. #1
    camofreak
    Guest

    Cheapest Place to get an EGW base?


    I'm looking to add a scope to my new Mark II F. What is the cheapest place to buy an EGW base? Optics Planet had them for 29.99 before Christmas. They are 39.99 now. There is a Place called Joe Bob Outfitters that has them for 34.99. Do you guys know of a better deal?

    Thanks

  2. #2
    Basic Member
    Join Date
    Aug 2010
    Location
    vero beach fl. / driftwood pa.
    Age
    74
    Posts
    3,529
    Well you could stop by their place in Quakertown Pa and try getting them angry at you.
    They just might pick up something to throw at you just to get you to leave.
    If your lucky it might be a scope base that fits your gun.

  3. #3
    Basic Member
    Join Date
    May 2012
    Location
    Berlin, Pa
    Posts
    277
    I usually have good luck using optics planets ebay store. At times I can use the Buy It Now feature for a lower price than off their website. Remember they are free shipping over $30 so figure that into the price from some other places that might seem cheaper.

  4. #4
    acg025
    Guest
    Well I got to individual bases from Gander Mountain for $5 each and I had to try a few before I got it right. The bases that fit were for a Browning Mark II.

  5. #5
    Basic Member
    Join Date
    May 2012
    Location
    Berlin, Pa
    Posts
    277
    The individual Weaver bases are a #16 for the proper ones according to their chart.

  6. #6
    camofreak
    Guest
    I looked at the Weaver #16 bases, but they say to grind the screws down because they are too long... I'm scared of that.

  7. #7
    DaveD
    Guest
    I have a set of #16s on my wifes GLY. Plug and play.

  8. #8
    Basic Member upSLIDEdown's Avatar
    Join Date
    Mar 2014
    Posts
    568
    I bought the 2 I've got from Joe Bobs. Shipping is lightning fast from them too.

  9. #9
    Basic Member
    Join Date
    Jan 2014
    Location
    Louisville, Kentucky
    Posts
    861
    AXIS 7mm-08 , 22-250

  10. #10
    kpaul
    Guest
    Warne M824/824 base. Their web site FAQ says the rings are manufactured in a way when properly installed don't need to be lapped!

Similar Threads

  1. Cheapest place to buy a 10,11,110,111
    By futurerider103 in forum 110-Series Rifles
    Replies: 13
    Last Post: 11-23-2015, 02:02 AM
  2. cheapest .224 bullets
    By dxjxrose in forum Ammunition & Reloading
    Replies: 10
    Last Post: 12-28-2013, 10:21 AM
  3. Replies: 13
    Last Post: 05-21-2011, 10:25 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •