Was hoping to tap into some of that expert knowledge out there. Have a model 11 in an HS Precision stock inletted for an Accurate two piece DBM, supposedly an OEM DBM for some model Savages. All is well except the model 11 rear action screw (right behind the magazine well) is a bit short. Anyone know the correct length screw and where I might find one? Or maybe if another model which uses the Accurate DBM has a screw which would work?
Thanks for any help.
Someone might know, but I don't think it is that big a deal. I just get screws from a hardware store and cut then file/grind to length. Getting one blued might be a reason to do otherwise. Boyds sells longer action screws in blue or nickel plated. They come in a set of 1 long and 1 short. The long one might work.
Why don't you just measure it?
"As long as there's lead in the air....there's still hope.."
I wasn't very clear; I know the length of the screw which is too short of course (1.5"), was hoping someone might know of a blued factory replacement maybe a 1/4" longer.
Posting Permissions
Reply With Quote
Bookmarks