Results 1 to 3 of 3

Thread: Rebarreling 110 in 7mm RM to .338 Win Mag.

  1. #1
    landphil
    Guest

    Rebarreling 110 in 7mm RM to .338 Win Mag.


    Hi guys, I have a flat-top model 110 in 7mm Remington Mag that I'm considering rebarreling to .338 Win Mag. From the searching I've done, and the fact that the case dimensions are identical other that the neck, only the barrel will need to be changed, correct? The DBM is listed as the same part # for both calibres, the bolt face is the same, and the barrel threads should both be standard shank. Have I done my homework right? If not, what am I missing? Thanks in advance.

  2. #2
    Basic Member bootsmcguire's Avatar
    Join Date
    Jan 2010
    Location
    Iowa
    Posts
    2,895
    Homework is correct. Same setup except the barrel. Pull off the old, screw on the new, headspace, snug nut, good to go.

    As a precaution, I would remove your front scope base, or at least back the base screws out about 1/2 way to make sure they are not interfering with the barrel threads (it happens sometimes) and you will be good to go.
    204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM

  3. #3
    landphil
    Guest
    Right on, thanks for the reply. I'll probably upgrade to a 1pc rail at the same time if I go ahead with it so the old bases will be off anyway. Now to find a good take-of .338 barrel here in Canada, and I might just have a small project on my hands.

Similar Threads

  1. Rebarreling
    By Hvylvy in forum 110-Series Rifles
    Replies: 14
    Last Post: 06-02-2017, 12:38 PM
  2. rebarreling
    By savage2 in forum 110-Series Rifles
    Replies: 6
    Last Post: 02-25-2017, 08:23 PM
  3. rebarreling savage 111, 7mm rem mag... go to .300 win mag?
    By YJrockhopper in forum 110-Series Rifles
    Replies: 5
    Last Post: 03-08-2016, 02:56 PM
  4. rebarreling my 300 Win Mag
    By Savageman110 in forum 110-Series Rifles
    Replies: 1
    Last Post: 10-03-2012, 03:56 PM
  5. rebarreling a 110
    By cooker900 in forum 110-Series Rifles
    Replies: 59
    Last Post: 01-05-2012, 10:30 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •