.308 bore guide?

[Scoped.22]

What kind of bore guide would fit the Savage axis .308?
and what kind of rod should I use?

[Rosco]

These guys have all manner of great Bore Guides which you can buy at Midway, Brownells etc.. https://www.possumhollowproducts.com/Home_Page.html
As for the rod go with a Dewey 1 Piece Cleaning Rod.

[DrThunder88]

I use a Possum Hollow #5 on my 308 Axis. I drilled a solvent port hole in mine, but I suspect it's not necessary.

[LoneWolf]

I just use a Bore snake. I'm not a big fan of a Rod unless I have brass stuck or something like that.

[Scoped.22]

Thanks for everything guys! What size Dewey should I go with?

[Rosco]

They have a nylon 36 inch made for 30 caliber over at Midway that should work just fine.

[barrel-nut]

Tipton carbon fiber rods are awesome. I'll never buy anything else as long as they're available. Get the 44" model in case you get a longer-barreled rifle later (you probably will). Remember, you gotta clear the stock, too, so longer is better.
http://www.midwayusa.com/product/190...n-fiber-thread

[2111 Marine]

i'm using a Tipton carbon fiber cleaning rod .270 -.45 cal 36" long and it is the best cleaning rod i've ever used and it follows the rifling with little to no effort and not using a bore guide !!! . I'm also using Pro-Shot bore brushes and mops to clean and lube the bore