Results 1 to 9 of 9

Thread: Gunshack 6.5 Grendel

  1. #1
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248

    Gunshack 6.5 Grendel


    Does anyone out there have an ER Shaw barrel in 6.5 Grendel, as sold buy Gunshack?

    What do you think of it ?

    Thanks.......Jim

  2. #2
    Basic Member
    Join Date
    Feb 2008
    Location
    south arkansas
    Age
    65
    Posts
    1,292
    Mine does well for the price. Not as good as my Brux but i would say on par with other button barrels. All i have is Brux in Grendal to compare it to but expected accuracy and cleaning is like my McGowen barrels.
    "And you shall know the truth, and the truth shall make you free.” John 8:32 (New King James Version)

  3. #3
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    That's good to here earl. I have a 260Rem ER Shaw that is top notch, but I ordered it from the factory. I'm curious to see if barrels produced in a run are equally good. The price is right, and no long wait, so I think I will push the button on the order. The 6.5mmGrendel sounds just right for my next build.

    Thanks.......Jim ;-))

  4. #4
    Bravojmc
    Guest
    Well did you push the buy button?
    if so how does she shoot?

  5. #5
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    Yes, I got the Grendel barrel from Gunshack. It looks good, and when I put a case in the chamber, it is a snug fit, and the chamber looks well machined from what I can see. It appears that I got the last 6.5 Grendel barrel Gunshack had in stock. Must of had my name on it.

    I got Dies, Cases, 100 & 120 grn Nos BT's, and along with other 6.5 pills I have for my 260 Rem, I am set to proceed. Oh, and I also got the 7.62x39 bolt head and bolt head parts kit.

    But, alas, I can't install the barrel until October when I go to Virginia. It will be a long wait :-((

    Thanks........Jim

  6. #6
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    As I said above, I got the 7.62x39 bolt head from Gunshack for this build, and I assume it is a Savage item. I assume that the bolt parts kit that I got is also Savage.

    This build will be on an action with a .473" bolt face. I have read were the .473" bolt face can work with the Grendel, but "we might want to change the ejector"? Change it to what?

    If I use the 7.62x39 bolt head, will the ejector in the kit work for the Grendel?

    Thanks for any help with this :-)).........Jim

  7. #7
    Basic Member
    Join Date
    Feb 2008
    Location
    south arkansas
    Age
    65
    Posts
    1,292
    Jim it is talking about the extractor not the ejector. To use the 473 bolt face and get good extraction you change to the 223 extractor because it is a little longer but since you have the correct bolt head just use the parts kit and you are good to go. Change the bolt head, check firing pin protrusion and you will need a 7.62x39 mag and follower if you plan to run this as a repeater.
    "And you shall know the truth, and the truth shall make you free.” John 8:32 (New King James Version)

  8. #8
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    Thanks earl ! :-))

  9. #9
    Basic Member
    Join Date
    Jul 2009
    Posts
    1,248
    I just was able to order 200 Hornady 6.5mm, 123grn, Amax's from Midway! :-))

    Getum while you can guys.....Jim

Similar Threads

  1. 6.5 Grendel switch
    By mikgarus in forum 110-Series Rifles
    Replies: 5
    Last Post: 03-25-2016, 09:43 PM
  2. A Big Thumbs Up for Gunshack
    By GaCop in forum Off-Topic
    Replies: 6
    Last Post: 07-27-2015, 07:29 AM
  3. Grendel or Creedmore
    By romad97 in forum Ammunition & Reloading
    Replies: 25
    Last Post: 10-19-2014, 01:45 PM
  4. 6.5 grendel
    By jlj1948 in forum 110-Series Rifles
    Replies: 8
    Last Post: 09-09-2012, 02:13 PM
  5. 6.5 Grendel
    By muttdog in forum 110-Series Rifles
    Replies: 36
    Last Post: 05-05-2012, 04:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •