Results 1 to 4 of 4

Thread: Axis rebarrel question

  1. #1
    Basic Member upSLIDEdown's Avatar
    Join Date
    Mar 2014
    Posts
    568

    Question Axis rebarrel question


    You guys that rebarreled an Axis, LoneWolf, Elgin maybe? Anyone else?

    Are you still using the OEM recoil lug setup? My stock is already bedded, with the OEM recoil lug bedded into the bedding job. I've read some people mill the front of the action back til it's flush and use a regular Savage recoil lug. This would let me use a precision ground lug, but would mean rebedding the action, at least the recoil lug section, and probably a skim bed throughout to make sure it's all smooth. Is it worth it?

    Thanks in advance

  2. #2
    Basic Member DrThunder88's Avatar
    Join Date
    May 2013
    Location
    Metro Detroit
    Posts
    1,383
    I used the integral lug on the Boyd's stock for my rebarrel project. I bedded up to the lug and tried to float the barrel over the top face of it.

    I've not heard of people milling off the front of an Axis receiver. It occurred to me, but I suspect it's as necessarily precise an operation as truing the face of a Remington 700 receiver and, therefore, beyond my capacity!

  3. #3
    Basic Member
    Join Date
    Jun 2013
    Posts
    2,879
    Still using the stanard factory lug in mine, but I did permanently bed it into my stock with Devcon. I feel with it permanently bedded there that it is a much more solid set up than the 2 pieces being able to move at all under recoil.

  4. #4
    Basic Member upSLIDEdown's Avatar
    Join Date
    Mar 2014
    Posts
    568
    Yeah, bedded mine into the stock as well. I used JB Weld instead of Devcon, but it's definitely permanently in there. Gonna try to put up a build thread at some point with the stages of the rifle.

Similar Threads

  1. Axis .223 rebarrel
    By jo2015 in forum Axis Series Rifles
    Replies: 4
    Last Post: 01-07-2018, 12:26 AM
  2. Anyone rebarrel your Axis to another caliper yet?
    By bloodhawke83 in forum Axis Series Rifles
    Replies: 41
    Last Post: 04-18-2016, 09:08 AM
  3. Axis rebarrel to .260 rem
    By Remingtonman in forum Axis Series Rifles
    Replies: 5
    Last Post: 02-01-2015, 06:56 PM
  4. Axis rebarrel Q's
    By red caddy 51 in forum Axis Series Rifles
    Replies: 4
    Last Post: 01-01-2015, 06:47 AM
  5. Rebarrel 223 Axis to 204
    By Kaianuanu in forum Axis Series Rifles
    Replies: 1
    Last Post: 10-10-2011, 10:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •