I am finishing up my first Savage build in 6BR and I don't want to get out to the range on Sunday and find I've missed something so I'm hoping some of you more experience builders will check my work. I started with a 270WSM Model 12 barreled action. Since it was a WSM I swapped out the bolt head for a .308 configuration and replaced the WSM firing pin and spring. I put on an 8 twist McGowen barrel and checked the headspace with a Clymer Go gauge and used the tape trick for a No Go gauge. I have a B & C Medalist tactical stock. I have free floated both the barrel and the tang on the rear of the action. Other than mounting a scope am I good to go?