Page 1 of 7 12345 ... LastLast
Results 1 to 25 of 161

Thread: My new Savage 10TR LE 24" .308

  1. #1
    Basic Member
    Join Date
    Jan 2014
    Posts
    149

    My new Savage 10TR LE 24" .308


    My new toy in the house...

  2. #2
    Deguy
    Guest
    Nice find, I have been looking everywhere to find another one of these.

  3. #3
    Team Savage
    Join Date
    Mar 2014
    Posts
    103
    Where did you find that?

  4. #4
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    New import to Czech republic from USA.

  5. #5
    s002wjh
    Guest
    hard to find right now. or just get a fcpk at buds, few days ago was $661, not sure now

  6. #6
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    Optisan Viper 8-32x60

  7. #7
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    First attemp how to upgrade my stock. What do you think?

  8. #8
    Team Savage jonbearman's Avatar
    Join Date
    May 2010
    Location
    NY
    Age
    66
    Posts
    1,385
    What is an optisan scope,never heard of them yet.Where is it made? What is the price range of that beast.The gun looks real good to me. I like the bolt handle.
    Willing to give back for what the sport has done for me!

  9. #9
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    Not sure with this upgrade... :-)

  10. #10
    Basic Member
    Join Date
    Jan 2014
    Posts
    149

  11. #11
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    100m training

  12. #12
    Basic Member
    Join Date
    Jan 2014
    Posts
    149


    Reloading ammo Lapua Scenar 155gr

  13. #13
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    4,983
    Very nice set up! Congratulations!

  14. #14
    ig25
    Guest
    Still breaking mine in. And load devolping. So far so good. It seams to like imr4640 and 175 smk. Looking for a descent scope right now.

  15. #15
    Basic Member Joe L's Avatar
    Join Date
    Nov 2012
    Location
    West Texas
    Posts
    214
    I've got a Model 10-FCP-K that likes the 175 SMK a little better than 168. I changed the stock to get some adjustment. The Accustock actually works very well. So far the ammo that shoots best in mine is Southwest Ammunition's 175 Match. 3" at 500 meters, even with me shooting it. Here is a video. I gthink this is the same barrel as yours but this one is fluted.
    http://youtu.be/6QHd16p12Sw

    Glad you are happy with your rifle. I am very happy with mine.

    Joe
    Savage 10 FCP-K with Bushnell 3.5-21x50 scope, lots of SIG Pistols.

  16. #16
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    I changed scope rings.

  17. #17
    Basic Member
    Join Date
    Jan 2013
    Location
    traverse city,michigan
    Age
    46
    Posts
    703
    Look like burris extreme tactical rings. Hows your scope height? What size did you use?

  18. #18
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    These are Vortex Medium. My scope is 30mm diameter and 60mm objective.
    http://www.vortexoptics.com/product/...pe-ring-medium

  19. #19
    Basic Member
    Join Date
    Jan 2014
    Posts
    149
    New toy for my rifle.

  20. #20
    New Member
    Join Date
    Jul 2013
    Posts
    8
    Good looking setup. Any issues feeding from the magazine. I seem to have trouble with my rounds getting hung up. So I need to back off the round a little and it settles, then goes right into the chamber. The bolt will be about 2/3 of inch from closing.

  21. #21
    Basic Member
    Join Date
    Jun 2013
    Location
    Czech Republic
    Posts
    23
    Bmmechan: Factory or reloaded ammo?
    What OAL have You had?

    I've had so far no troubles with rounds with OAL around 2.800"...

  22. #22
    New Member
    Join Date
    Jul 2013
    Posts
    8
    Starosta, All factory Federal Gold Medal Match 168 smk. When I run the bolt slowly I can see the round spring up from the mag and I think that's the culprit. It really feels like a magazine issue because if I lay the round just in front of the mag lips and run the bolt, the round slides in perfectly. However, having said that, I have no idea how they are getting hung up. Ill try to post a picture of a dummy round because I won't be able to get to the range for several weeks. Once the round is so deep in the chamber, there shouldn't be any sharp edges, maybe the throat but the tolerances are so tight that at this point the round should be aligned with the barrel.

    Any Ideas?

  23. #23
    Basic Member
    Join Date
    Jun 2013
    Location
    Czech Republic
    Posts
    23
    Bmmechan: Try to check the bolt face while pushing round forward.
    If the back of the round didn't jump properly where it should, bolt might be pushing whole round misaligned...?

    Just guessing, I hope more skilled guys will help - but my rimfire did exactly the same because of this.
    Last edited by Starosta; 07-30-2014 at 05:29 PM.

  24. #24
    Basic Member
    Join Date
    Jan 2014
    Posts
    149

  25. #25
    michaelnel
    Guest
    Quote Originally Posted by sniperjhk View Post
    First attemp how to upgrade my stock. What do you think?
    Don't give up your day job. ;-)

Page 1 of 7 12345 ... LastLast

Similar Threads

  1. What is your Coal for Savage 10TR. 308 24"
    By sniperjhk in forum Ammunition & Reloading
    Replies: 0
    Last Post: 11-23-2014, 08:09 AM
  2. Replies: 7
    Last Post: 11-17-2014, 12:05 PM
  3. Savage 10TR
    By jc5420 in forum Picture Post
    Replies: 9
    Last Post: 04-01-2014, 10:58 AM
  4. Savage 10TR
    By bads1buell in forum 110-Series Rifles
    Replies: 0
    Last Post: 02-03-2014, 10:19 AM
  5. Savage 10TR?
    By BoilerUP in forum 110-Series Rifles
    Replies: 5
    Last Post: 03-30-2013, 09:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •