Nice find, I have been looking everywhere to find another one of these.
My new toy in the house...
Nice find, I have been looking everywhere to find another one of these.
Where did you find that?
New import to Czech republic from USA.
hard to find right now. or just get a fcpk at buds, few days ago was $661, not sure now
Optisan Viper 8-32x60
First attemp how to upgrade my stock. What do you think?
What is an optisan scope,never heard of them yet.Where is it made? What is the price range of that beast.The gun looks real good to me. I like the bolt handle.
Willing to give back for what the sport has done for me!
Not sure with this upgrade... :-)
100m training
Reloading ammo Lapua Scenar 155gr
Very nice set up! Congratulations!
Still breaking mine in. And load devolping. So far so good. It seams to like imr4640 and 175 smk. Looking for a descent scope right now.
I've got a Model 10-FCP-K that likes the 175 SMK a little better than 168. I changed the stock to get some adjustment. The Accustock actually works very well. So far the ammo that shoots best in mine is Southwest Ammunition's 175 Match. 3" at 500 meters, even with me shooting it. Here is a video. I gthink this is the same barrel as yours but this one is fluted.
http://youtu.be/6QHd16p12Sw
Glad you are happy with your rifle. I am very happy with mine.
Joe
Savage 10 FCP-K with Bushnell 3.5-21x50 scope, lots of SIG Pistols.
I changed scope rings.
Look like burris extreme tactical rings. Hows your scope height? What size did you use?
These are Vortex Medium. My scope is 30mm diameter and 60mm objective.
http://www.vortexoptics.com/product/...pe-ring-medium
New toy for my rifle.
Good looking setup. Any issues feeding from the magazine. I seem to have trouble with my rounds getting hung up. So I need to back off the round a little and it settles, then goes right into the chamber. The bolt will be about 2/3 of inch from closing.
Bmmechan: Factory or reloaded ammo?
What OAL have You had?
I've had so far no troubles with rounds with OAL around 2.800"...
Starosta, All factory Federal Gold Medal Match 168 smk. When I run the bolt slowly I can see the round spring up from the mag and I think that's the culprit. It really feels like a magazine issue because if I lay the round just in front of the mag lips and run the bolt, the round slides in perfectly. However, having said that, I have no idea how they are getting hung up. Ill try to post a picture of a dummy round because I won't be able to get to the range for several weeks. Once the round is so deep in the chamber, there shouldn't be any sharp edges, maybe the throat but the tolerances are so tight that at this point the round should be aligned with the barrel.
Any Ideas?
Bmmechan: Try to check the bolt face while pushing round forward.
If the back of the round didn't jump properly where it should, bolt might be pushing whole round misaligned...?
Just guessing, I hope more skilled guys will help - but my rimfire did exactly the same because of this.
Last edited by Starosta; 07-30-2014 at 05:29 PM.
Bookmarks