Hi all,

My Model 10 LE Precision Carbine in .308 has an interesting issue I hope someone can help me with. I ordered and installed a PTG spiral fluted bolt body. The fit seems nice...a little bit tighter than the factory bolt body and certainly smoother to operate. The issue I have is that it seems to have issues picking up the next-to-last round out of the magazine. I have tried two different mags, have hand-polished the bolt, played with the feed lips on the mags...all to no avail. Mags have been cleaned, springs are good and the action is spotless. The gun feeds okay the first two rounds, then you have to press the bolt forward on the third round, retract it fully, then close the bolt and it MIGHT feed. Usually, I just get a jam. Visually, I see no points of interference and no odd marks on any of the brass from the bolt head. Re-installing the factory bolt body returns function to completely normal. Any wisdom is greatly appreciated!

Thanks in advance,
- Ted