Reply With QuoteHey Ted, yup just a drop after the primer is set, as far as starting over you might as well cry uncle and do it,
Dean
Dean where does the super glue go? just a drop after the primer is set? I had one fall out yesterday and spill into the mag well and what not. Ivan I'm frustrated I thought I had the oal right on now I'm not sure. I'm just going to start over I've got some Hornady brass to try. Chambering seems heavy with the federal brass even with sammi spec lengths. My chamber looks clean. What's the best method to polish chamber 0000 steelwool? I'm using a Wilson .247 bushing and have flipped it over also for tighter neck tension. Anyway, I gave I a break and went fishin' this mornin'!
Ted
Hey Ted, yup just a drop after the primer is set, as far as starting over you might as well cry uncle and do it,
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
What was the ambient temperature when primer blew, compared to when working up load. If temp difference was enough it can increase pressure. Also leaving ammo with the sun shining on it can raise pressure. If this is the case, back off the powder charge a grain or two & work up.
Charge was .7 below max temp had been steady until today. We're havin' a heat wave.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks