Hello everyone. This is my first post and I just wanted to say hello before I get started. So Hello.

I recently purchased a model 10 Predator Max 1 in 6.5 creedmoor. The rifle is showing great potential to become my long range weapon of choice. I have taken it out to 600+ yards many times and out to 1000 yards a couple of time. I am in the process of upgrading my scope to a Vortex Viper PST and now I am thinking about upgrading the stock. The factory accustock is good but I would like something with a beavertail forend and after do some research I found the Manners T3 at stockys.

So here are my questions. If I bought the T3 would my factory bottom metal and mag bolt right into the Manners or do they take a different type of DBM? My rifle is the 4.40" spacing model with the bottom trigger guard bolt release.

I am not dead set on the Manners T3, so if y'all have any other recommendation I would love to hear them. Here is a link to the stock I am talking about. Thanks.

http://www.stockysstocks.com/servlet...e-10-12/Detail