I am building the following 308:

1. Savage Target Action RBLP
2. Shilen Bull Barrel
3. HS Precision Stock
4. Sightron 10-50-X60

I was planning to use a warne Maxima 2 pc base with Burris Signature rings. It looks like I will have to get the Extra High 30 mm rings to clear the barrel. I don't like a scope to be any higher than necessary.
I'm concerned about the torque created with this high (.580) of a ring. Do you think the ring will hold zero with this scope?
Would I be better off going with a higher base like the EGW 1 pc with a lower set of signature rings?

I have never mounted a scope this large with a 60 mm objective.