First thing that comes to mind would be to watch for a barrel for a T/C Contender in 22-HP. IIRC at one time is was an option available through their custom shop. Now I see their Contender offerings are minimal. Might check with one of the aftermarket Contender Barrel makers like SSK or one of the others whose name I cannot remember at this moment.
Otherwise I would think you are going to be searching for a Savage 99 chambered for it.
You may be able to convert a Savage 340 from 30-30 to a 22-HP since they use basically the same bolt head size. I have heard of a couple of guys chambering Savage 110 barrels in 30-30 and running them as single shots so I see no reason a 22-HP could not be done also.
The real trick may be finding a blank for the .228" bullets that the 22-HP uses, and then finding a smith/barrel maker that has the reamer.
Good luck, and let us know what you find.
Bookmarks