Accutrigger to older flat back ?

[tammons]

I know this has been addressed but I cant find it.

I have an older flatback long action that I have a SSS trigger on that I use for hunting.

I have a newer top bolt release CF short action that has an accutrigger on it, but this is going to be a target rifle, and I would rather
have the SSS trigger on the target rifle and the accutrigger is works fine for a hunting rifle.

So is it possible to put the accutrigger on the older flatback ?

[Hotolds442]

With some modification of the milled slot in the tang, yes it can be done.
Az_Gun_Nut did a write up with pictures and other good bits of info here: http://www.savageshooters.com/showth...r-vise-a-versa

[KRP]

Keep the original safeties and trigger brackets with each action. I tried the accu-trigger with the old sear and it didn't feel right so I swapped sears and it works fine. Drilled a hole in the tang for the accu-trigger spring then adjusted everything out and that was that.