Reply With QuoteGo to some of the stock mfg. sites and see if they use the same P/N. Paul
I've searched and just can't find the answer. Can you use a wood stock from a 110 center feed as a stock for a 110 stagger feed, both long mag (7mm RM) and short mag (308). I can't get a good pic to tell, but if the mag stays with the reciever, why would it matter? Thanks, kb
Go to some of the stock mfg. sites and see if they use the same P/N. Paul
Yes you can. The reverse is not true however - at least not without making some slight modifications to the stock.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
I have been wondering this myself. If I have a removable long magazine action and a blind long action stock, and assuming I don't mind doing the bottom inletting myself, will that all work?Originally Posted by J. Baker
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks