I was wondering how some have dealt with the rear pillar for a LA(.223) non-accu-trigger, the sear being so close to the action screw. I think I have a solution but wanted to know what others have done.
Also please explain why you want to only bed the rear of the recoil lug. I know you don't want the lug putting up-ward pressure on the action so it shouldn't bottom out on the stock and you want the barrel-nut free floated,but I am not understandiding why no bedding in front of the lug.I bedded match 54 Anschutz's and always formed a new lug with the bedding material.


Thanks