Reply With QuotePPU is Privi
Just got a modified case for my Hornady OAL gauge off ebay for the 6.5x55. All the other ones I have are Hornady headstamped,this one is stamped PPU. Are these the same case or did somebody pull a fast one?
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
PPU is Privi
Same case, different manufacturer. I've made dozens of them using other brands, Win, Rem and etc.Originally Posted by 243LPR
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
I'm thinking Hornady doesn't load the swede so they buy the brass elsewhere?
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Either that, or it was advertised as a modified case, which it is, just not modified by Hornady. Either way, it will still work.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
It was in the regular Hornady packaging,that's what confused me.
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Then I'd say post #4 holds the answer.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Either way as long as it is threaded properly and the neck opened up a little so the bullet will slide with slight resistance it will work. I make my own on a $35 drill press. Just need the right drill bit, tap and neck expander. I highly suspect a lot of them on ebay are homemade. Especially the hard to fine ones.
Floyd
Posting Permissions
Bookmarks