Results 1 to 2 of 2

Thread: 115 SMK in .270win load data needed

  1. #1
    Basic Member ShowMeShooter's Avatar
    Join Date
    Jan 2013
    Location
    Missouri
    Posts
    107

    115 SMK in .270win load data needed


    I made the trip to Sierra today for some MK's for my .223, while I was there I picked up some 115 MK's in .277. I want to give these a try in my .270win (22" 1:10 twist). I've looked around and not had much luck finding any load data for them using the search engine.

    Has anyone here came up with a decent load for this bullet and IMR4350, or even have some published load data on this bullet/powder combo? I'm thinking this would be a good dose of coyote meds. and a fun little screamer on groundhogs.

    Any help would be awesome. Should have bought their manual while I was there, huh!

  2. #2
    Basic Member
    Join Date
    Oct 2011
    Location
    WY / SC
    Posts
    196
    First, email Sierra, they will respond quickly and do a pretty good job recommending starting loads.
    Otherwise, use the 110g data, start middle/low on the chart and ladder up. Sierra's figures are very conservative.

Similar Threads

  1. chrono data contradicts load data...bigtime
    By Texas Solo in forum Ammunition & Reloading
    Replies: 14
    Last Post: 11-09-2013, 11:01 PM
  2. Load data needed for 22-250 w/80gr bullets
    By JCalhoun in forum Ammunition & Reloading
    Replies: 4
    Last Post: 07-31-2013, 11:29 PM
  3. 300 WSM Load Lead bullet load data?
    By snowgetter1 in forum Ammunition & Reloading
    Replies: 0
    Last Post: 12-14-2012, 03:41 PM
  4. Hornady Data check needed. 7RM, H-1000, 154gr SST
    By r3dn3ck in forum Ammunition & Reloading
    Replies: 3
    Last Post: 11-17-2012, 10:45 AM
  5. 270win load?
    By Kaianuanu in forum Ammunition & Reloading
    Replies: 11
    Last Post: 11-06-2011, 05:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •