Reply With QuoteBurris Signature Zee is the way to go.
I have a Mark II trr-sr with scope mount from DIP. Cannot remember where I got my rings but I would like to change them out. Any suggestions? Thanks.
Burris Signature Zee is the way to go.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Thanks J. Baker. Since I have the rail, is there a specific size I would need? I know the rimfire brand wouldn't work, so would I need the 1" Weaver Style?
That sounds about right, you wont need as high of rings since you have a rail, this is what I do, you rest your scope on top of the barrel over they action, like if there were rings holding it, and hold up the eye piece end so it is close to even as you can, and measure how much distance there is between the scope tube centre and the rail, and then just get the next size up, IE: 0.50 to center of scope tube then get they 0.65 or medium rings. easy as 3.14159265
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
+1 Burris sig zee...
This is how I always end up with this end result.
[IMG][/IMG]
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Posting Permissions
Bookmarks