That's good information right there......
When using brake cleaner to clean your stock before bedding the barrel channel, spray liberally BEFORE filling any large voids with Styrofoam.
Oops! :)
That's good information right there......
'Scuse me while I whip this out...!
I bet that was a mess .
Relatively speaking, dondick, it wasn't so bad.
Oh, that reminds me...
One more tip...
When squeezing the "black stuff" outta the tube of JB Weld, be sure NOT to puncture the tube with your thumbnail.
THAT will make a mess!
I should have stayed in bed this morning.
Geeeez kid....
You in a world of it today.
Put the tools down & go watch TV for a while before you hurt someone.
'Scuse me while I whip this out...!
Also, if you are using a can of Pledge to clean the windshield on your Honda Goldwing, do not set it down next to a can of brake cleaner unless you want to find out real quick what a replacement windshield is going to cost you when you pick up the wrong can.
Bookmarks