280 AI saami go no go gauges ?

Aviator · 12-10-2013, 07:32 PM

Does anybody have a set of these they would be willing to loan out for a quick barrel Install...I would be glad to pay shipping both ways..I would only need them for a day ?

Thank's !!

**Apache** · 12-10-2013, 07:42 PM

They rent them here:

http://www.4-dproducts.com/displayit...8&tname=rental

**foxx** · 12-10-2013, 07:59 PM

It would be cool to rent those. I can't find them on that site, though, Apache.

Am I missing something there?

OOPS Nevermind.

It right there on the page you sent us. Sorry

stangfish · 12-10-2013, 08:23 PM

use your brass.

**foxx** · 12-10-2013, 08:25 PM

But with AI, you don't always have the brass until after you get the barrel installed.

stangfish · 12-10-2013, 08:38 PM

Have you ever tried it? There is .020 difference in the dimension to the neck shoulder transition from 280 to 280AI. The AI being shorter. Tighten it up and fire form your brass. Turn barrel 3/8 of turn in and resize your brass.

Looked up spec's edited to show correct difference.

**foxx** · 12-10-2013, 08:49 PM

Interesting.

How 'bout 260 ai?

stangfish · 12-10-2013, 08:58 PM

That is another thread. Lets keep it real for the OP.

**foxx** · 12-10-2013, 09:28 PM

Originally Posted by stangfish

Have you ever tried it? There is .020 difference in the dimension to the neck shoulder transition from 280 to 280AI. The AI being shorter. Tighten it up and fire form your brass. Turn barrel 3/8 of turn in and resize your brass.

Looked up spec's edited to show correct difference.

That's cool to know.

**mattri** · 12-25-2013, 09:48 AM

513-100-015WB
GO GAUGE, fits .280 Ackley Imp

Brownells has the GO gauge in stock, can use a piece of scotch tape on the back for a no-go. Just a head's up.