As some of you may recall, I'm building my first stock. I've had lots of questions along the way too.
Well, we got through the pillar installation with excellent results. Thank you very much.
Next was my bedding questions, and that job I am also pleased with. Thank you very much.

I finished all the sanding finally, and just put on the first coat of Tru-Oil. So here are the oiling questions:
1) What is the minimum number of coats needed to protect the stock? (it's laminated)
2) Will the finish get darker with each coat?
3) What's the best way to the Tru-Oil off your hands?! That stuff is sticky!

I'll definitely get some pics up when this puppy is done. Thanks again.