I have been checking this forum out for a while. I own a few 220's (410 28 20 and 12) but today I picked up a very clean 219B in 22H. I knew it needed a firing pin and didn't think it would be to hard to fix. I ordered two pins from Numrich's and pulled the stock. Upon disassembly I found the rear section of the pin but the striker was gone. Are there any helpful hints in replacing the pin. I have looked at the diagram and would like to know what steps you have used in the past.
Any advise would be great, thanks,
Tony
Tony-did you ever get it fixed??
I had a 219 Hornet and replaced the firing pin once. I dont have the gun any longer so without handling one Id be hard pressed to tell you how to do it.
I believe I took the stock off and then somewhere there was a very fine screw that kept the pin assembly in place-that needs to be loosened. and now Im lost.
Do you head up N (Montmorency County, MI)anytime in the summer? Bring it along and we will fix it.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks