If you subscribe to the OCW method your nodes should be around 3% apart. So let's say you have a node at or around 41.8-42 than your scatter node will show up around 42.4- 42.6. Your next accuracy node would be around 43.2- 43.4. I verify my nodes sometimes by using the scatter nodes. If I think I have a node I will load up +/-1.5% (scatter node falls in the middle of accuracy nodes) and see if the grouping falls apart.
I like #5 in you OCW. Mainly because of the trending poi and the nice triangle grouping (nice and even not stringing).
I try and find two powders that shoot just in case one powder becomes har to find ie h4350. Good luck.
Bookmarks