Results 1 to 14 of 14

Thread: New 22-250 load data "help"

  1. #1
    stewart3
    Guest

    New 22-250 load data "help"


    I have just broke in my new 11vt in 22-250 and would like to start working up a load for it. I have limited access to powders. Hogdon is about it, I can get some h322,h355 or possibly cfe223. I have been shooting 55gr for predator hunting. Does anyone have any load data for these powders.

  2. #2
    Basic Member Hotolds442's Avatar
    Join Date
    Nov 2013
    Location
    Clark County, WA
    Age
    64
    Posts
    3,758
    Try http://data.hodgdon.com/main_menu.asp
    theres tons of data there for the 22/250
    Last edited by Hotolds442; 12-10-2013 at 10:23 PM.

  3. #3
    Bike Effects
    Guest
    Getting hold of some H380 would be a plus.

  4. #4
    Basic Member Hotolds442's Avatar
    Join Date
    Nov 2013
    Location
    Clark County, WA
    Age
    64
    Posts
    3,758
    Quote Originally Posted by Bike Effects View Post
    Getting hold of some H380 would be a plus.
    And here's why:
    h380 This was an unnamed spherical rifle propellant when the late Bruce Hodgdon first used it. When a 38.0 grain charge behind a 52 grain bullet gave one hole groups from his 22 caliber wildcat (now called the 22-250), he appropriately named the powder H380. H380 is also a superb performer in the 220 Swift, 243, 257 Roberts and other fine varmint cartridges. Available in 1 lb. & 8 lb. containers.

  5. #5
    Basic Member
    Join Date
    Jun 2013
    Posts
    120
    XBR8208, Varget, Benchmark, H414, RE15, A2400 and Power Pro 2000MR all work good in the 22-250.

    Out of your list I would work up with the CFE starting at 35 and ending at 40.

  6. #6
    maxl
    Guest
    +1 on the H380, mine loves 38.2 grains

  7. #7
    Basic Member scooterf79's Avatar
    Join Date
    Nov 2013
    Location
    West Virginia
    Age
    45
    Posts
    1,007
    Alot of those powders will work really well for you...I mainly use IMR4064 but Ive tinkered with some of the aforementioned powders and had good luck with them, Varget will make 40s scream in both of my 250s but I just dont quite have the accuracy as with the heavier bullets
    I'm the Boss. I make sure what she wants gets done.

  8. #8
    Basic Member
    Join Date
    Oct 2011
    Location
    WY / SC
    Posts
    196
    Quote Originally Posted by maxl View Post
    +1 on the H380, mine loves 38.2 grains
    37.5 H380 does it for me.

  9. #9
    leo158
    Guest
    If your temps get quite high where you hunt, I would suggest an extreme powder. I know a couple first hand where temps in the high 80s to 90s useing H380 is a no no when useing 38gr or better. The pressure was quite excessive. I had great results with varget and sierria 55 gr spitzers for accuracy and knock down from groundhogs to deer. That in my rifle is a great combo.

  10. #10
    Basic Member
    Join Date
    Aug 2011
    Posts
    331
    My FVSS loves Sierra 1365 55 grain Gamekings using 36 grains of Varget.

  11. #11
    stewart3
    Guest
    Thanx for the input. I picked-up some cfe223 I think that is the best powder for me, granted the limited supply, for the time being. hopefully things get better.

  12. #12
    Basic Member
    Join Date
    Dec 2006
    Location
    SE Tennessee
    Posts
    609
    The powders you list are on the fast end of .22-250 powders. I have shot lots of 4895 (both versions), 4064, H380, and Big Game. I went several years without a .22-250 after the groundhogs were wiped out by the coyotes. I have started shooting a .22-250 again with Big Game and Varget. RL15 would be a good choice too.

  13. #13
    Basic Member
    Join Date
    Nov 2013
    Posts
    73
    I know you didn't list Varget as a powder you are looking at but 35.5 GR of Varget pushing a 55 gr Hornady V-MAX will give me less than 1" at 200 yds if I do my part.

    Darrell

  14. #14
    stewart3
    Guest
    I may have access to varget in the future and maybe some retumbo if I'm lucky. For the time being I've got the cfe223 and some 7828ssc.
    Thanx for the info I appreciate it.

Similar Threads

  1. 308 fcp, 24" barrel, 150gr accubond load data anyone?
    By navistar82 in forum Ammunition & Reloading
    Replies: 8
    Last Post: 03-29-2017, 08:41 PM
  2. Replies: 6
    Last Post: 08-04-2014, 07:43 PM
  3. Swift Reload Data: is scirocco 2 reloaded to scirocco "1" data?
    By thermaler in forum Ammunition & Reloading
    Replies: 7
    Last Post: 02-13-2013, 09:35 PM
  4. 6x47 "LAPUA" starting load suggestion
    By Dennis in forum Ammunition & Reloading
    Replies: 9
    Last Post: 03-06-2011, 02:45 PM
  5. 308 load data, 28" 1-12"twist Broughton barrel
    By Dennis in forum Ammunition & Reloading
    Replies: 10
    Last Post: 01-27-2010, 12:14 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •