Results 1 to 10 of 10

Thread: 6mm Remington......

  1. #1
    Team Savage
    Join Date
    Oct 2007
    Location
    Portsmouth, Oh
    Age
    60
    Posts
    114

    6mm Remington......


    I am looking for opinions on the 6mm Rem. As far as accuracy, velocity, barrel life, brass availability and cost, and just general comparisons to 243 and other 6mm rounds. Are there any benefits to it?
    Stu

  2. #2
    Basic Member
    Join Date
    Dec 2006
    Posts
    567

    Re: 6mm Remington......

    .

    The 6mm Remington is one of my favorite cartridges.

    Have used the 6mm Remington on prairie dogs.

    With 75-grain Hornady bullets does fine.

    .

  3. #3
    stevec
    Guest

    Re: 6mm Remington......

    Awsome round. built one on a Mauser action for my son, It loves 85gr pills.

    Steve

  4. #4
    Super Moderator Blue Avenger's Avatar
    Join Date
    Dec 2006
    Location
    Minnesota
    Age
    65
    Posts
    2,969

    Re: 6mm Remington......

    I get .5@100 out of my 17" striker barrel when I have a good day. bad day it still is under 1".
    I also have a .243, .243AI & 6mm AI and a couple 6BRs.
    I have stronger good feelings for the 6 Rem over the others with no good reason. :) none of then are totally dialed in.
    .223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor

  5. #5
    chestsprings
    Guest

    Re: 6mm Remington......


    have own a Rem 6mm since the late 1950's.

    My primary deer rifle is a Ruger #1 (semi-custom), in the Rem 6mm. have shot over 75 deer with it, using Barnes X’s. Have 1600+ rounds thru it, & if I do my part, it will put three shots in less than ½ inch all day long. Some times better.

    Shoots hornady 75 gr. V- maxs great.

    Bought a Rem 6mm varmint contour for my VLP, from Jim ( Northlander) & I’m very happy with it, shooting the 75 gr. V-maxes, & 105 gr. A-maxes. It shoots exceptionally well also.

  6. #6
    Uncle Jack
    Guest

    Re: 6mm Remington......

    Back during the last Ice Age I bought my first custom barrel for my 03A4 Springfield. It was a 26" Apex .244 Remington. The gunsmith talked me into getting a 1/10 twist to stabilize 100 grainers. The winds out in the Southern California desert were a constant factor. The following year Remington dropped the .244, changed the twist to 1/10 and renamed it the 6mm Remington.

    So, I guess I had one before there was one. It is/was a great cartridge and that was a great rifle.

    uj

  7. #7
    chestsprings
    Guest

    Re: 6mm Remington......


    I guess I should have clarified about the 244/6mm, for a few of the younger shooters.

    the difference between the 244 & Rem 6mm is only the twist of the barrel. the case is the same.

    as "UJ" explained the 244 initially was a 1:12 twist. the rag gun writers at that time got hung up on 10 gr. of bullet wt. , & decided the 244 couldn't shoot 100 gr. bullets, of what every kind they were using. I shot some Speer that were over 90 gr. & they shot just fine.

    The damage was done, as the marketing gun rag writers of that time use to copy cat writing, & proclaimed it not suitable for deer size game because of 10 gr. of bullet wt.

    my opinion, (I know what opinions are, every one has one) the Rem 6mm is a better design cartridge with the longer neck. also, as far as I know,or ever heard, the Rem 244/6mm has never experienced the "pressure spikes" that have been documented with the 243, or Rem 7mm Mag.


    As I have stated, in my opinion, it's a good 6mm case.

  8. #8
    Uncle Jack
    Guest

    Re: 6mm Remington......

    I have to agree with chestsprings....I never met a deer that knew the difference between a 90grn or a 100 grn bullet.

    uj

  9. #9
    steveinwv
    Guest

    Re: 6mm Remington......

    I still have my first centerfire rifle, Remington 700 BDL 6mm. I don't remember it ever shooting a group worse than 1" with anything that I have ever put in it from 55gr. Nosler BTs to 105gr. Hornady AMaxes. The long neck is excellent for heavy bullets.

    244=1 in 12"
    6mm=1 in 9"

  10. #10
    kpb
    Guest

    Re: 6mm Remington......

    Mine loves 87gr V Max and a shot of H4350 46.2gr

Similar Threads

  1. 260 remington. went bad.
    By tom338 in forum 110-Series Rifles
    Replies: 47
    Last Post: 12-04-2014, 09:32 PM
  2. 260 remington
    By duenweg in forum Ammunition & Reloading
    Replies: 0
    Last Post: 12-23-2011, 01:14 PM
  3. 260 remington
    By cmdc in forum 110-Series Rifles
    Replies: 1
    Last Post: 09-29-2010, 01:59 PM
  4. 6mm remington
    By aff11 in forum 110-Series Rifles
    Replies: 17
    Last Post: 04-14-2010, 04:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •