shells not ejecting out my model 12 308

[Miller7.62]

how strong should the spring be on the extractor side of the bolt that pushes the spent ammo away from bolt

[dfrosch]

Might be a couple things.

Sometimes the notch on the ejector is not cut long enough. The travel of the ejector is stopped by the lock pin. The ejector does not hold the empty case firmly against the ID of the action and the case falls off the bolt head as soon as it clears the chamber. The fix is to file the notch back further by about .020".

Might also be a sloppy extractor. Fred explains it better than I could...
http://savageshooters.com/SavageForu...c,23731.0.html

Either way, you might need a little reference...
http://savageshooters.com/SavageForu...c,10681.0.html

Last but not least, welcome to the forum. Hope you enjoy it enough to join. The $12 membership fee will be the best investment you'll make in a while. It will enable access to great deals in the classifieds and informative technical articles.


Good luck,
Dana

[Dennis]

Fred sent me the bigger ball bearings for my 22-250. I shot the gun yesterday and I am still having trouble with the gun ejecting the spent shells!!!!!

I know there are a lot of post about this, but as of this date my 22-250 still has the problem!

I love the gun, except for this problem!

HELP

[dfrosch]

Fred sent me the bigger ball bearings for my 22-250. I shot the gun yesterday and I am still having trouble with the gun ejecting the spent shells!!!!!

I know there are a lot of post about this, but as of this date my 22-250 still has the problem!

I love the gun, except for this problem!

HELP

Have you tried lengthening the notch in the ejector?

[Dennis]

I will take the bolt to my gunsmith and let him shave it. 22-250

My 243 kicks them out like a cannon ball, that's what I don't understand!