looking for a new barrel

[scvpiper]

I have a older Savage tactical 110fp in 308. Im not sure if it is small or large shank?

[stangfish]

Northland shooters supply
4D
Shilen
Sin Arms
I know I am missing something.
You might put something in the Want To Buy ads or view the Classifieds. I think there was one over there.

[scvpiper]

no this is not a WTB add Im just not sure of the shank size the serial # starts a F if that helps

[keeki]

Everyone I've ever seen is a small shank

[Dennis]

Everyone I've ever seen is a small shank

Ditto, only some of the magnums are Large Shank.

[keeki]

Not to start a discussion or argument, but what's wrong with the fp barrel. I've owned 4 fp's (none in 308), I've had vlp's, lrp's and fp's and pretty much everything savage has to offer and for some odd reason those fp's would just plain shoot.

[scvpiper]

Ohh its a shooter just thinking of trying another caliber

[Patch700]

This is from McGowens site :

There are several ways to identify your current Savage shank. Target actions use the large nut and will have the word "Target" on the action. There are also 3 screws in the receiver for a target shank. The barrel nut on the large shank is shorter in length than the nut used on a standard shank. Savage Thread Specs:
Target Savage - 1.115-20 TPI (1.400 Long +/- .020)
Standard Savage - 1.060-20 TPI (1.600 Long +/- .020)
Large Savage - 1.115-20 TPI (1.500 Long +/- .020)

[JCalhoun]

It's a standard (small) shank.

[Dennis]

Target actions use the large nut and will have the word "Target" on the action.

I don't know what Savage has done, but I received a "Target" Action 3 months ago and their is not one word or mark stamped on the Action. My older ones are loaded with info. (?)