which powder meters the best.

[mil-dot]

AA2495, H4895, AA 2460, IMR4895, VARGET, IMR 4064, RL-12, RL-15, VIHT N -140, WIN 748.

I have a hornady powder meter with case activated drop. i am going to be loading .308 150grain fmj. which powder would work the best.

[Rooster 50]

out of that bunch I would say Win 748.

[Eric in NC]

The ball powders will do it best - don't know if the AA powders are ball or stick. BLC2 is a good powder for duplicating 7.62x51 NATO loads (sounds like what you are doing).

[sinman]

ramshot

[dcloco]

Try some Win 760. Touch faster than Varget, very accurate, and still a ball powder.

[b()()ga]

AA 2460 is a good Ball powder and works well in .308 Win.

[laportecharlie]

+1 on W748 to meter the best. It might just work the best too.
Charlie

[mil-dot]

thanks....i got a starting point at least

[Rooster 50]

The ball powders will do it best - don't know if the AA powders are ball or stick. BLC2 is a good powder for duplicating 7.62x51 NATO loads (sounds like what you are doing).

Isn't Blc-2 and Win 748 the same powder???????

[laportecharlie]

I had heard that H335 and W748 were the same. Don't know for sure and would not assume.
Charlie

[Eric in NC]

The ball powders will do it best - don't know if the AA powders are ball or stick. BLC2 is a good powder for duplicating 7.62x51 NATO loads (sounds like what you are doing).

Isn't Blc-2 and Win 748 the same powder???????

They are close in burn rate but they aren't the same (like H48954 and IMR4895).

[mil-dot]

i've been using H322 and have had good luck so far.

Jesse