Extractor ?

[RP12]

My extractor is copper colored, is that the old style ? Does the new style work better ? Also, what's the reason for a larger detent ball ?

[mudpig]

Yes....the copper colored are the old style. The new ones are black and supposedly they are a little better....longer I believe. The larger detent ball gets rid of some of the float experienced by the smaller ball creating a better/stronger bite on the case rim.

[RP12]

Where do I find one without paying outrageous shipping costs ? Also how do you take it out ?

[RP12]

I need a place to order a new style extractor and a ejector retaining pin from. If you have PN's that would be great.

[JW]

http://www.gunshack.com/index.php?ro...product_id=645
Give them a call, they might have single parts also
Good folks to deal with

Jack

[RP12]

Thanks JW.

[RP12]

I figured out how to get it out and back in. What larger size detent ball are you guys using ?

[JW]

.140 dia
Jack

[thomae]

.140 dia
Jack

9/64^th inches, if you are looking at fractional sizes.

[JW]

Thanks Thomae
I did not even think about fraction size!
Jack

[RP12]

Thanks thomae, good to know.

[BillPa]

I need a place to order a new style extractor and a ejector retaining pin

You can order those parts directly from Savage. My last order for three each extractors, ejectors and ejector springs was $33.00 including shipping. They were at my door in three days.

https://store.savagearms.com/partfinder/

One other tidbbit. When you get ejectors directly from Savage you'll receive the new style with the follower. You may receive the old style from other vendors. I also highly suggest using a new spring when replacing the ejector with the new style.

Bill