Reply With QuoteYou answered your own first question. For your second one: then you have a problem.
How is a straight wall rimless cartridge headspaced? I know it relies on the case mouth but, what if the case is too short to begin with?
You answered your own first question. For your second one: then you have a problem.
Ed Bell, PA Deer Hunter & NRA Life Member ~ “The right of the citizens to bear arms in defense of themselves and the State shall not be questioned.”~
If the case mouth wont do it, you have to hope the extractor holds it. lot of semi auto handguns have extractors that hold the case very well as a secondary measure.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Then the brass has been trimmed to far, or the chamber is long.Originally Posted by oto
[COLOR=#ff0000]Hello to all you nice folks at NSA :)[/COLOR]
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks