Results 1 to 6 of 6

Thread: 7.62X39 odd load data?

  1. #1
    Basic Member
    Join Date
    Mar 2013
    Location
    SW Floriduh
    Age
    72
    Posts
    97

    7.62X39 odd load data?


    I've built an XP100 in 7.62X39, 15 inch barrel. very accurate with 100, 110 and 150 Gr. bullets.

    I've come across a cache of .308" 165 and 200 Gr. bullets that I'd like to try subsonic.

    The local hog population has gotten very sensitive to muzzle blast, jeeps, trucks and tractors don't bother 'em a pound, but lite off a .223 and they're gone in a new York minute. A "Verwy, Verwy qwiet" accurate subsonic thumper could be a game changer...

    What I need is load data for the heavy thumpers, or, at least some safe starting points. AA1680 works best for all my super sonic stuff, but heavy subsonic is a whole 'nother thing for me. I've read that fast pistol powders are the hot lick, but I've no idea wear to start. Thanks, paul.
    Last edited by red caddy 51; 10-13-2013 at 04:47 PM.

  2. #2
    Basic Member
    Join Date
    Mar 2013
    Location
    SW Floriduh
    Age
    72
    Posts
    97
    Nobody is playing with this round, subsoic?

    Did I post this question in the wrong forum?

    Did I miss laundry month again?

    Just askin',
    Paul

  3. #3

  4. #4
    Basic Member
    Join Date
    Sep 2011
    Location
    Right where I Always Need To Be. Usually...
    Posts
    2,507
    Hey Red,
    Where ya getting the brass from for your 7.62x39?
    Boxer or Berdan primed?
    I've been considering reloading for my AK's & SKS. The price on Wolf & Tiger 7.62x39 has come down a little however, availability is still a little tight.
    'Scuse me while I whip this out...!

  5. #5
    Basic Member
    Join Date
    Mar 2013
    Location
    SW Floriduh
    Age
    72
    Posts
    97
    Thomae, thanks for the response, 2 of those links were knew to me and very helpful.

    Fgw, The head stamp is IMI, boxer primed, anealed neck's, unfired. I bought 3000 rounds,(~,03/round) bulk, from Brigade Quartermasters or cheaper than dirt, IDRW, about 15 years ago. (insert the "old fart" joke of your choice here) I've heard rumors of S&B selling, brass case, loaded rounds, but I've not seen any personally.

    Paul

  6. #6
    Basic Member
    Join Date
    Aug 2013
    Location
    KY
    Age
    46
    Posts
    18
    I was able to snag some winchester loaded ammunition, have 80 rnds, traded some 40sw for it. Also have some PPU. I purchased some Lapua brass from Midway usa. It appears much better than the other two I have. Bruno Shooter supply sells it by the case, I ordered a few there just to see quality, and it was. Havnt been able to find any IMI yet.

Similar Threads

  1. chrono data contradicts load data...bigtime
    By Texas Solo in forum Ammunition & Reloading
    Replies: 14
    Last Post: 11-09-2013, 11:01 PM
  2. .243 win v-max load data
    By scott597 in forum Ammunition & Reloading
    Replies: 3
    Last Post: 05-11-2013, 09:57 AM
  3. 300 WSM Load Lead bullet load data?
    By snowgetter1 in forum Ammunition & Reloading
    Replies: 0
    Last Post: 12-14-2012, 03:41 PM
  4. 6.5 WSM LOAD DATA
    By okie2 in forum Ammunition & Reloading
    Replies: 24
    Last Post: 07-07-2012, 07:20 PM
  5. Need some load data...
    By bootsmcguire in forum Ammunition & Reloading
    Replies: 5
    Last Post: 06-20-2010, 11:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •