Results 1 to 15 of 15

Thread: Hornady Concentricity Tool

  1. #1
    New Member
    Join Date
    Oct 2007
    Location
    Philadelphia Pa
    Age
    78
    Posts
    1,185

    Hornady Concentricity Tool


    Has anyone seen or purchased this concentricity tool looks really trick for what it does, been thinking of buying one

  2. #2
    New Member
    Join Date
    Jun 2007
    Posts
    7

    Re: Hornady Concentricity Tool

    According to Hornady's site they are not out yet.
    https://www.hornady.com/shop/?ps_ses...e10ac73321c437
    Kyle
    I might have a few savage rifles.

  3. #3
    mallard
    Guest

    Re: Hornady Concentricity Tool

    Looks like Sinclairs has them.

  4. #4
    New Member
    Join Date
    Oct 2007
    Location
    Philadelphia Pa
    Age
    78
    Posts
    1,185

    Re: Hornady Concentricity Tool

    Lock Stock and Barrel has them but says's out of stock, put one on order today anyway lowest price i see around

  5. #5
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,407

    Re: Hornady Concentricity Tool

    I have the one from RCBS and it works great. Also a good bit cheaper than the Hornady one IIRC (think it was about $80 or so, but it's been a few years).
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  6. #6
    okie2
    Guest

    Re: Hornady Concentricity Tool

    SAVE YOUR MONEY.
    If you find any loads that are not true what are you going to do with them.
    No one makes any tool to straighten them or makes them right.
    Spend your money on some good dies!

  7. #7
    New Member
    Join Date
    Oct 2007
    Location
    Philadelphia Pa
    Age
    78
    Posts
    1,185

    Re: Hornady Concentricity Tool

    When i receive my hornady tool will make a report on how it works

  8. #8
    Forester
    Guest

    Re: Hornady Concentricity Tool

    Quote Originally Posted by okie2
    SAVE YOUR MONEY.
    If you find any loads that are not true what are you going to do with them.
    No one makes any tool to straighten them or makes them right.
    Spend your money on some good dies!
    Out of true rounds...sighters, practice, plinkers...anything but a record shot or long range hunting.

    There are tools to straighten them out there, I have not looked into the Hornady tool but I thought it did as well?

    Good dies are important, but how do you know if the expensive dies you bought are "good" unless you can measure the product they produce?

  9. #9
    Basic Member
    Join Date
    Dec 2006
    Posts
    178

    Re: Hornady Concentricity Tool

    Quote Originally Posted by Forester

    Good dies are important, but how do you know if the expensive dies you bought are "good" unless you can measure the product they produce?
    Exactly! I found out that my cheapest set of dies produced less runout than dies costing 2 -3 times as much.

  10. #10
    mallard
    Guest

    Re: Hornady Concentricity Tool

    Quote Originally Posted by Balljoint
    When i receive my hornady tool will make a report on how it works
    Hey Balljoint

    Did you receive it yet? If so, how does it work?

    Thanks

  11. #11
    New Member
    Join Date
    Oct 2007
    Location
    Philadelphia Pa
    Age
    78
    Posts
    1,185

    Re: Hornady Concentricity Tool

    Haven't received it yet, am checking on it today

  12. #12
    groupshooter22
    Guest

    Re: Hornady Concentricity Tool

    Quote Originally Posted by Balljoint
    Haven't received it yet, am checking on it today
    Any word yet on this balljoint.

  13. #13
    New Member
    Join Date
    Oct 2007
    Location
    Philadelphia Pa
    Age
    78
    Posts
    1,185

    Re: Hornady Concentricity Tool

    Lock Stock and Barrel is closed as of now, called Sinclair have one on order BUT they are out of stock and so it goes on

  14. #14
    groupshooter22
    Guest

    Re: Hornady Concentricity Tool

    I know about ls&b first hand so no surprise there. Was hoping somebody had used one of these, thinking of getting one. The straightening of brass by hand makes for sore fingers.

  15. #15
    bpratl
    Guest

    Re: Hornady Concentricity Tool

    When I first saw their add on this tool I thought that it was a good idea and was unable to find one in stock.
    I got tired of waiting so I decided to fabricate one and I posted it on another reloading site. It does correct run out with very little effort.

    http://www.thefiringline.com/forums/...ghlight=runout

Similar Threads

  1. Run out, Hornady concenticity tool and Lee crimp
    By echo5mike in forum Ammunition & Reloading
    Replies: 17
    Last Post: 06-08-2014, 10:57 AM
  2. hornady hand primer tool
    By dangimissed in forum Ammunition & Reloading
    Replies: 0
    Last Post: 01-05-2013, 06:55 PM
  3. Hornady Concentricity Tool
    By Luckus in forum Ammunition & Reloading
    Replies: 3
    Last Post: 05-18-2012, 12:14 PM
  4. Hornady OAL tool thread size?
    By pdog06 in forum Ammunition & Reloading
    Replies: 3
    Last Post: 06-25-2010, 11:31 PM
  5. Hornady Lock n Load Concentricity guage
    By Bark in forum Ammunition & Reloading
    Replies: 2
    Last Post: 01-28-2010, 01:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •