Most folks here will tell you Sig Zs. There is probably something to it.
I recently installed TPS rings I found used on EBay for $50. Mediums put the bell of my scope(50mm) .5 inches above the barrel. I have a similar 20 MOA rail.
I shot another Savage this weekend with a 40mm objective mounted on medium Weaver tactical rings and the clearance was about right.
Something else to think of: Make sure the bell will clear the end of the rail with the scope mounted in the position you need. Mine could stand to be a touch lower but I am not sure the bell would clear the rail without shaving it down a tetch.
Bookmarks