As requested this is where you guys can put pics of your rigs and such for these models.
As requested this is where you guys can put pics of your rigs and such for these models.
Last edited by thomae; 11-02-2013 at 08:32 PM.
Guess I'll go first - here's my LH Axis build in .284 Winchester.
Action T&T'd by SSS
Timney Trigger
Shilen 1-9 twist barrel (23")
SSS Pro Hunter stock
Fluted bolt body
Customized bolt handle
Bead Blasted and Parkerized Finish
DNZ Hunt Master scope mounts
Bushnell Elite 3200 3-9x40mm (for now)
Royal Jacaranda stock in last picture is for a future .223 build.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
[QUOTE=MrFurious;211311]Guess I'll go first - here's my LH Axis build in .284 Winchester.
Action T&T'd by SSS
Timney Trigger
Shilen 1-9 twist barrel (23")
SSS Pro Hunter stock
Fluted bolt body
Customized bolt handle
Bead Blasted and Parkerized Finish
DNZ Hunt Master scope mounts
Bushnell Elite 3200 3-9x40mm (for now)
MrFurious did you ever do a range report on this build?
No I haven't. My reloading equipment has been boxed up most of the summer (and still is) due to a remodeling project. Hard to setup your reloading equipment when your shiney new reloading area still doesn't have a work top. LOL I'm also waiting on a replacement upper cabinet since the first one they sent me was damaged. Hopefully those two things will both be resolved in another week or two.Originally Posted by LoneWolf
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
I'll follow with mine:
Savage Axis
SSS Axis Pro Hunter Stock
McGowan 26in SS 1 in 10 twist Varmint Contour
Rifle Basix SAV-1 Trigger (1.5-2lbs)
SWFA SS 10x42
EGW 20MOA Rail
Karsten Cheek Riser
SPS2 Adjustable, butt plate
Modified 10rds Box mag (created by a friend)
Before the final mods above, but she shoots.
MrFurious your build looks great as it was the first in the Pro Hunter stock. I haven't finished up the final details on mine yet, but I'm quite happy with the way it has come along.
Last edited by LoneWolf; 10-13-2013 at 06:21 AM.
Savage Axis 223 action
Savage 12vlp barrel, 1:7 twist (changed for a Shilen bull lately)
EGW 20MOA base
Bob Fortier stock, bedded
Mystic Precision Mpod bipod
Homemade bold-knob (bro-in-law)
Vortex Crossfire 8-32 x 50 scope
Rifle basix trigger
I shot my first F-Class season this summer, now getting ready for next season. New stock in the works, new barrel installed, will be shooting the Berger 90 vld for next season, should be fun
Last edited by bobfortier; 10-12-2013 at 08:58 AM.
Mine is a very standard rig for hunting. Axis in .223.
Sent from my Nexus 7 using Tapatalk 4
Last edited by boisvert; 10-12-2013 at 03:24 PM.
****** image upload not working on forum...
http://postimg.org/image/v2aly9nsx/
Sent from my Nexus 7 using Tapatalk 4
Can't upload images to the forum, they have to be hosted on another site like PhotoBucket and you post the IMG code they provide here.
boisvert's pic:
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
I assume we'll start seeing more pictures in this week as the Boyd's stocks start hitting the streets. This thread will hopefully turn into a one stop shop for all the configurations that people will come up with for their Axis rigs. I myself will have another new item to show off hopefully by this weekend time frame!
Subscribed!
Hey fellas, this is my first post. I've only had my Axis for a few months. I bought the .223 threaded (SR) version a while back. I was initially disappointed with the accuracy, but in defense of the Axis, I was shooting the cheap 55 grain stuff. I started hand loading to see if that would help, starting out with 65 grain Sierra Gameking bullets. The accuracy on this rifle is pretty good now. It is shooting under MOA at 100 yards. I worked on the trigger early on and got it down to 2 lbs 5 oz, but wanted better. I decided to invest in the Basix trigger, which got me down to just under 1 1/2 lbs and passing the safe tests.
I have been following Lonewolf's build and I might pull the trigger on the Sharp Shooter Supply (SSS) stock soon. For those that have the SSS stock, did it come with swivel studs, or did you install them? Do you use the factory recoil lug, or does one come with the SSS stock?
Anyway, here is a pic of mine as it is. The flash suppressor I put on for looks. I took it off later, but may put it back on if I can verify it doesn't negatively impact accuracy.
I moved the factory recoil lug and sling swivel studs from the factory stock to my ProHunter Stock. Took a few minutes to reinstall them. I drill a hole smaller than the threads on the studs but no deeper than required and screw them in!
Just an FYI, in another month or so I will probably move this entire thread to the Pictures Post board where it should be. I'll leave it here in the meantime to get the ball rolling as all the new stock pic's start rolling in.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
here is my 22 250 so far
Just picked it up today!
Savage Axis Camo chambered in 30-06 Sprg
Centerpoint 4-16x40 Scope (Probably going to be switched out)
I have been talking to: Jim at Apache Gunworks for a 20" Threaded Medium Bull Barrel; Frank, for (2) 10 round, Long Action Axis Magazines; and Boyds I have been looking at either a Tacticool Stock or Classic in Nutmeg... Maybe you fellas can help me out there on which stock to go with! I hope this goes better than my Stevens build because that sucked and I ended up selling it haha So far both, Jim and Frank, have been excellent to talk to and I can't wait to actually place my orders with both of them and get this ball rolling!
Rick
I have 30-06 Axis with the same scope......Going to keep it for now. Took it out the other day and it worked pretty good. Held zero with apparently no problems. Using mine for deer hunting and I am sure it will do the job after shooting about 12 rounds it still holding on.. Just can't beat the price point.
Just picked it up today!
Savage Axis Camo chambered in 30-06 Sprg
Centerpoint 4-16x40 Scope (Probably going to be switched out)
I have been talking to: Jim at Apache Gunworks for a 20" Threaded Medium Bull Barrel; Frank, for (2) 10 round, Long Action Axis Magazines; and Boyds I have been looking at either a Tacticool Stock or Classic in Nutmeg... Maybe you fellas can help me out there on which stock to go with! I hope this goes better than my Stevens build because that sucked and I ended up selling it haha So far both, Jim and Frank, have been excellent to talk to and I can't wait to actually place my orders with both of them and get this ball rolling!
Rick
work in progress just got my scope on!
New stuff added!
I guess I'll add these to the file:
Axis Pro Tac stock from SSS.
Sent from my HTCEVOV4G using Tapatalk 2
Last edited by LoneWolf; 10-26-2013 at 07:17 PM.
Can you post the link to that stock? I didn't see it ^^
It's not out yet but will be on sharp shooters supply's website when it becomes available.
Sent from my HTCEVOV4G using Tapatalk 2
Last edited by LoneWolf; 10-25-2013 at 02:10 PM.
Lonewolf, you need to empty some PM's in your inbox.
"As long as there's lead in the air....there's still hope.."
Done Sir.
Posting Permissions
Reply With Quote
Bookmarks