Don't have a "3 way" but have been using a Forster Classic for more than 30 years w/o any problems other than the occassional replacement of the cutter about every 10 years.
Any comments, just seeing if anyone has one and what their thoughts are!
[B][SIZE=3]Dennis[/SIZE][/B]
Don't have a "3 way" but have been using a Forster Classic for more than 30 years w/o any problems other than the occassional replacement of the cutter about every 10 years.
Vietnam Vet, Jun 66 - Dec 67
I might try it out for the heck of it! I go through a lot of 308's!
[B][SIZE=3]Dennis[/SIZE][/B]
It's not fast if you have a bunch of brass to trim (unless you have the adaptor for a power screw driver or drill).
Vietnam Vet, Jun 66 - Dec 67
I have the RCBS, it's not fast and you definetly need the drill to use it. Is it because it's cutting three times as much or ?????? Just thinking out loud!
From the pictures, I like the Forester better!
[B][SIZE=3]Dennis[/SIZE][/B]
I have the Classic Model, and have for 5 or 6 years, and like it. If im only trimming off a little, like truing up new brass, I use the crank. But if I have to really cut some back, I use the cordless drill, its much faster.
I think there a good unit.
Mike.
I used my three way RCBS cutter last night with a cordless drill! Made all the difference in the world! It cut and trimmed the brass perfec. I guess when your trimming about a 100 cases, you might be getting tierd without realizing it!
[B][SIZE=3]Dennis[/SIZE][/B]
Bookmarks