Can you make an Accu-stock fit an older staggered feed action ?
If you have skills you can do anything. You might need a mill to do it right...if it can be done 'right".
The hole is roughly 1/8th off centerline so you simply need to find a way to move the hole over that much.
I would think opening the hole up and then pillaring it would be the ticket. But I'm just thinking out loud.
Last edited by stangfish; 09-29-2013 at 07:23 PM.
Great, Thanks Pard.
Last edited by RP12; 10-01-2013 at 08:43 AM.
A reminder that offering to buy or sell outside the classifieds will result in infractions and deleted posts.
No one has done it yet on this thread, but I thought that mentioning it now might keep it from happening.
RP12: Best thing I can suggest is to upgrade to a paid membership and then put a Want To Buy in the classifieds.
Edited my reply as to not be misleading or in violation of the forum rules.
The nice thing about aluminum is that, if you do it carefully, machining aluminum is not much more difficult than machining wood. I think Stangfish's suggestion would be the simplest. You would have to have the correct bit, though.
I have a machine shop guy who does that stuff for me, cheap. Not something I would do myself.
Posting Permissions
Reply With Quote
Bookmarks