hey guys, greetings from australia.
so after a few trips out with the savage 12 LRP (target action with DBM) in it's factory form with very promising results i decided that this rifle was worthy of becoming my long range project rifle. Friday the mailman delivered an XLR evolution chassis.
Resized to 86% (was 1024 x 768) - Click image to enlarge
Resized to 86% (was 1024 x 768) - Click image to enlarge
also, my best mate and a fellow forum member surprised me with some sexy sexy lapua brass for my birthday
Resized to 86% (was 1024 x 768) - Click image to enlarge
it's been a great weekend so far and the fun with the .260 is only just beginning.
got to excited to do a hell of a lot of load testing yet but decided to stretch it's legs out to 900yds
the bottom 2 shots were sighting and adjusted after those then a 10 shot grp
then just for fun we found a spot to run it out to 1200m (1312yds to you guys)
Loads were 139gr lapua scenars in front of 42.5gr of ADI 2209 (equiv of H4350)
Man this makes me want A 260 barrel for my flcp-k.... Nice shooting!
Dummos, nice rig, good shooting and HAPPY Birthday!!
very nice rifle, and shooting
Very nice shooting. Truly impressive with the stock barrel.
Beauty gun.: )
What are your loads and what kind of impact are they arriving with at 1000+ yds? Just curious.
[B][COLOR="#FF8C00"]Shooting--it's like high-speed golf[/COLOR][/B]
Bad to the bone!
good onya digger. still waiting for my LRP 260 in the great New Zealand.
I have an LRP too and it rocks. It's not in a XLR chassis yet, but will be. Lovely rifle and great shooting!
I am a new member, and this is the first post I viewed. Just wanted to say that I own a lrp in 6.5 creedmoor and absolutely can't say enough good about it. Awesome rifles.
Hi Mate
I'm an Aussie too
Where did you get your action from and if you don't mind me asking how much?
My Plan is pretty much the same as your rifle expert in 6.5x47 Laupua
Last edited by Rat man407; 10-06-2013 at 11:16 PM.
I bought mine as a factory .260 the LRP is the only rifle that comes with this particular action i think rrp is around 1600 from memory
cool looks like i'm getting one do you know where your mate got the brass from ?
Local dealer ordered it from nioa. Your nearest gun shop should be able to as well otherwise shooters.com.au will ship to your house as well
Thanks Mate
What load did you settle on? I built a Mega Maten with a Lilja 260 barrel that was wicked accurate. I was running the Hornady 140 Amax over 44.5g of H4350 at 2840 FPS. It was a sweet rifle that I sold because someone offered me a ridiculous price for it. I now have a Savage 12 in an XLR chasis with a Shilen .308 barrel. I'm thinking of going back to .260.
Nice rifle Mate!
With running them in the XLR chasis are there any mods need or just stright bolt in ?
Straight bolt in unless it's .223 it will need a mod to the bolt stop to pick up from the aics mag I believe
got all the rails and and front bag rider (the rails are for looks only) the bag rider is beautful.
made this "bag" for my front rest which is wood lined with soft rubber covered in pool table felt and it slides through there like a dream
Last edited by Dummos; 12-20-2013 at 12:40 AM.
******, now I have to buy another rifle.
Noice
260 is next on my "to do" list.
[B][COLOR="#FF8C00"]Shooting--it's like high-speed golf[/COLOR][/B]
Very nice. Looking forward for my Model 12 varmint action and Criterion match barrel in 260 Rem to come in from Jim at NSS. 4350 powder is almost non-existent around these parts, but have some Reloder 19 sitting around, along with some Silver State Armory and Lapua brass.
Not sure I can duplicate that performance, but will be fun giving it a go.
Yeah no kidding! I'm thinking about a 6XC and a 6.5 Creedmoor or 260AI build....Originally Posted by Topsail
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks