Two things. Is the accustock from a bottom bolt release or a top bolt release. Have you aver used a broomhandle and sandpaper to open up a barrel channel. This one will be easy. It will look thin at the fron though.
Ive been looking into accustock take offs. I have found one for a model 11 with same spacing and dbm. However the contour for the take off is a sporter. Would there be any issues dropping a 10p heavy varmint in it. Are they all the same stock is my question basically.
Two things. Is the accustock from a bottom bolt release or a top bolt release. Have you aver used a broomhandle and sandpaper to open up a barrel channel. This one will be easy. It will look thin at the fron though.
The nut is the same. The lug is different. You can make yours work if you have a bench grinder. If you want to use a precision lug and shape it or you want to grind your own to fit and have me surface grind it for you, send it to me.
No, you would not have to. I just offered to do so for you. It is not required.
You seem to know a lot about these. Does a bottom bolt release mean the stock is an accustock without having to open it up and check?
No there are some Package series guns 11/111 and 16/116 that are bottom release, synthetic non accustock. From what I have seen all of the 16/116 Weather Warriors are. The aluminum internal frame defines the accustock.
Bookmarks