Results 1 to 3 of 3

Thread: 340 front sight screws

  1. #1
    Stormhawk
    Guest

    340 front sight screws


    Does anybody know of a source for a 340 series front sight screw, the long screw, not the short. Checked Numrich and the usual sources. They dont seem to be available anywhere.
    As a last resort I may have to fabricate one. Does anybody know the thread pitch and count?
    Thanks,
    -M-

  2. #2
    stangfish
    Guest
    Well you could always buy the screw to get the diameter and the thread pitch from it.
    Last edited by stangfish; 09-10-2013 at 06:29 AM.

  3. #3
    Mr Briese
    Guest
    Stormhawk,

    I had the same problem until I found that the screws to attach the scope rail to my ruger 10/22 fit. The head of the screw is just a touch proud of the sight but it is barely noticeable. I think the screw is a size 6 with 48 threads, according to my caliper the shaft is 0.20" long. I still have a couple screws left from my 10/22. Email me your address and I'll send you one.

Similar Threads

  1. Front sight came off.....
    By rb288 in forum 110-Series Rifles
    Replies: 4
    Last Post: 06-05-2017, 06:36 PM
  2. Where to buy front Sight
    By SDMike in forum 110-Series Rifles
    Replies: 2
    Last Post: 10-11-2016, 04:56 PM
  3. Replies: 3
    Last Post: 11-06-2014, 01:50 AM
  4. Savage 99: 99 front sight R&R
    By Monkeymaster in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 7
    Last Post: 01-02-2013, 08:13 PM
  5. Front screws to long....
    By goblin141 in forum Optics
    Replies: 7
    Last Post: 03-08-2010, 10:45 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •