[size=10pt]About once every 10 shots my Mod 12 w/ accutrigger doesn't fire. The trigger releases and clicks but the firing pin doesn't fall at all and there is no mark left on the primer. I make sure the bolt is fully closed etc. Usually if I lift the bolt handle and recock it, then it fires normally. When it does fire, the indentaton left by the firing pin looks perfectly normal, not too shallow or too deep. Am I doing something wrong, or is it the rifle? It's a relatively new rifle and has been shot about 100 rounds. Just wondering if this is a common problem with this rifle, and if there's a known solution.