Results 1 to 3 of 3

Thread: Problem with extraction

  1. #1
    Red Green
    Guest

    Problem with extraction


    Took my new Mark II BGV to the range today to shoot some groups. First impressions...very accurate. First shot was in the 9 ring at 25 yards. Took 4 more shots fine tuning the scope. First group using CCI SV was 1/2 inch. Moved to 50 yards and took 10 shoots and got a grouping of 3/4 of an inch. Me like very much.

    The bad...cycled rounds good at first, but it started not extracting the round from the chamber. It got to the point it would do this with almost every round. I ran a bore snake through several times to clear anything that would make the cases stick in the chamber, but they still did anyway. Any thoughts on what to attempt next?

    EDIT: I just cycled some rounds through cold and they all extracted fine. Could it be the wax lube on the CCI's causing the problem after the chamber heats up?



    Last edited by Red Green; 08-17-2013 at 10:12 PM.

  2. #2
    JCalhoun
    Guest
    This is a common issue with Savage rimfires. Contact Savage and they should take care of it.

  3. #3
    Basic Member
    Join Date
    Aug 2013
    Age
    67
    Posts
    76
    Nice 50yd group for a new rifle.

Similar Threads

  1. Mark I/II/93R: Brass Extraction problem
    By Cjd3 in forum Savage & Stevens Rimfire Rifles
    Replies: 7
    Last Post: 01-16-2016, 09:31 PM
  2. Savage 99: Extraction Problem 99f in. 308
    By MacDR in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 3
    Last Post: 09-26-2013, 11:10 AM
  3. Help with 110 extraction/ejection problem
    By Fiend in forum 110-Series Rifles
    Replies: 1
    Last Post: 03-09-2011, 08:46 PM
  4. Savage Extraction Problem
    By kemmercur in forum 110-Series Rifles
    Replies: 3
    Last Post: 02-16-2011, 09:24 AM
  5. Savage 99: Savage 99 1948 eg extraction problem
    By Hunting Man in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 3
    Last Post: 12-18-2010, 11:29 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •